Block circuit | ICs ideal for Electric Power Steering Motors | Features
ICs ideal for Electric Power Steering Motors

Electric Power Steering (EPS) uses an electric motor to assist the operation of the steering wheel. Compared to the conventional hydraulic assist system, EPS improves fuel efficiency because it does not require an engine-powered oil pump. Additionally, EPS is indispensable for advanced driver assistance such as Autonomous and Lane Keeping Assist, which can be precisely controlled by an electric motor.
ABLIC offers ICs ideal for EPS motors that support “A” (Autonomous) in CASE. ABLIC offers a comprehensive range of products: such as ZCL™ Hall effect ICs which operate ideally in BLDC motors, high-accuracy Voltage Trackers for torque sensor power supplies, LDOs with built-in watchdog timers for monitoring MCUs, and battery monitoring ICs that monitor 12V auxiliary batteries for abnormal voltages.
ICs ideal for Electric Power Steering Motors
Click the product name for more product information.
*VD: Voltage detector (Reset IC) *LDO: Low-dropout regulator *WDT: Watchdog timer
ICs ideal for Electric Power Steering Motors
Product | Recommended product | Applications and Features |
---|---|---|
DC-DC converter (Switching regulator) |
S-19914/5 | 36V input, low noise, available in the industry’s smallest package. Contributes to fewer and more compact external parts. |
Watchdog Timer | S-1951x | With reset and LDO regulator functions. Current consumption of 3.0µA. |
Battery Monitoring IC (Voltage detector) |
S-19113 | Provides undervoltage monitoring. Built-in SENSE Pin reverse connection protection circuit. Current consumption of 0.6µA. |
Voltage Tracker | S-19720 | The industry’s lowest offset voltage of ±5mV. Available in an ultra compact (2.46 x 1.96mm) package. Current consumption during power-off of 4µA. |
Hall effect IC (Magnetic sensor IC) |
S-57TZ S | ZCL™ Hall effect ICs are perfect for BLDC motor control, creating stable BLDC motor control over a wide temperature range. |
Hall effect IC (Magnetic sensor IC) |
S-57RB S | Bipolar Hall effect Latch ICs with a thin and small package. The thin package contributes to thinner BLDC motors. |
EEPROM | S-25Axxx (SPI) |
Serial EEPROM. Built-in data protection functions. |
EEPROM | S-93Axx (3-wire) |
|
EEPROM | S-93Sxx (3-wire) |
Voltage Tracker S-19720 series
Low offset voltage
Ultra-compact package
Low current consumption
Voltage Tracker that contributes to high-accuracy sensing
The industry’s lowest offset voltage of ±5mV helps keep the power supply voltage of the off-board ratiometric sensor equal to the reference voltage (Vref) of the AD converter (ADC) handling ECU measurements, raising sensor reading accuracy. The voltage tracker with its 36V input and 50mA output current is housed in an HSNT-6(2025), the industry’s smallest package. The S-19720 helps further reduce the footprint of automotive devices.
≫Learning more about the S-19720
≫What is a Voltage Tracker?
EEPROM S-25Axxx / S-93Axx / S-93Sxx series
No.1 share in japanese automotive market
We offer a wide range of product lineups with high reliability, high performance, and high quality
ABLIC’s automotive serial EEPROMs offer a wide range of product lineups that supports various interfaces, memory capacity, and packages.
Series name
Interface: SPI bus, 125℃ operation Memory capacity: 1K, 2K, 4K-bit
Interface: SPI bus, 125℃ operation Memory capacity: 8K, 16K, 32K-bit
Interface: SPI bus, 125℃ operation Memory capacity: 64K-bit
Interface: SPI bus, 125℃ operation Memory capacity: 128K-bit
Interface: SPI bus, 125℃ operation Memory capacity: 256K-bit