Applications

Automotive Traction Inverters

ICs Ideal for Traction Inverters

ICs Ideal for Traction Inverters

1. Overview

A Traction Inverter converts high-voltage battery DC power into 3-phase AC power, which in turn, drives the traction motor.
ABLIC has produced a number of high caliber IC's that are ideal for Traction Inverter operation. ABLIC offers a comprehensive array of products: such as the Isolated Flyback Controller that supplies power to gate drivers, Voltage Trackers that supply power to Linear Hall effect ICs for current sensing, Battery Monitoring ICs that detect 12V battery overvoltage and undervoltage, and Window Voltage Detectors that monitor MCU.

ICs Ideal for Traction Inverters

2. Block circuit

Click the product name for more product information.

Resolver PMIC Boost MCU HV Battery Linear Hall sensor module Power of Linear Hall sensor modules Motor 18V 5V Isolator Isolated Gate Driver LDO Window VD Battery Monotoring IC Voltage Tracker Flyback Controller Transformer LDO

*VD: Voltage detector (Reset IC)   *LDO: Low-dropout regulator

 

3. ICs Ideal for Traction Inverters

Product Recommended product Applications and Features
Flyback Controller
(Switching regulator)
S-19990

Low voltage operation (from 3.0V). 60μA quiescent current. The industry's smallest package.

App note

Window Voltage Detector S-191A/B

6V operation. Monitors undervoltage and overvoltage. Voltage detection response time of 10µs typ. With manual reset function (S-191A).
Battery Monitoring IC
(Voltage detector)
S-19113

Provides undervoltage monitoring. Built-in SENSE Pin reverse connection protection circuit. Current consumption of 0.6µA.
Battery Monitoring IC
(Voltage detector)
S-19115

Provides overvoltage detection. Built-in SENSE Pin reverse connection protection circuit. Current consumption of 0.6µA.
Voltage Tracker S-19721

The industry's lowest class offset voltage of ±4.5mV. 250mA output current. Built-in Anomaly Notification.
Voltage Tracker S-19720

The industry's lowest offset voltage of ±5mV. 50mA output current. Available in an ultra compact (2.46 x 1.96mm) package. Current consumption during power-off of 4µA.
LDO Regulator
(Linear Regulator)
S-19222

Power supply for sensors and microcontrollers (MCUs). High PSRR 75dB (at f = 1.0 kHz). Fast Transient Response.
LDO Regulator
(Linear Regulator)
S-19212

For use in gate driver circuits. The output voltage can be set between 2.5 to 16V.
LDO Regulator
(Linear Regulator)
S-19213

For use in gate driver circuits. The output voltage can be adjusted between 1.8 to 30V using an external resistor.

Passive components of MinebeaMitsumi Group

Product Recommended product Contacts
Transformers TR Series MinebeaMitsumi Inc. Tokyo Headquarters
1-9-3, Higashi-shimbashi, Minato-ku, Tokyo, 105-0021
TEL: 81-3-6758-6711 Home Page

Product Inquiry

 

4. Features

Window Voltage Detector S-191A/B series
Window detection
Fast Detection Response

Automotive, 125°C Operation, 6 V, Window Voltage Detector with Fast Detection Response  S-191A/1B Series

Contributes to Building Greater Functional Safety of Automotive Devices

The window voltage detector capable of monitoring undervoltage and overvoltage, 6V input, voltage detection response time of 10µs typ. The S-191A Series has a manual reset function that enables the diagnosis of non-safe faults of the IC.

≫Learning more about the S-191A/B


S-191A

Detection response time: 10μs typ.
With manual reset function

Datasheet

S-191B

Detection response time: 10μs typ.

Datasheet

Voltage Tracker S-19721 series
Low offset voltage
Built-in Anomaly Notification

Automotive, 125°C Operation, 36 V Input, 250 mA Voltage Tracker with Reverse Current Protection Function S-19721 Series

Improves Higher-accuracy Sensing and Safety Design

The voltage tracker with its offset voltage of ±4.5mV, 36V input, 250mA output current, and built-in Anomaly Notification. It can handle three types of abnormalities: overvoltage, overcurrent at the output pin, and heating of itself. It is possible to select the appropriate combination of outputs according to the specifications and applications.

≫Learning more about the S-19721
≫What is a Voltage Tracker?


S-19721

Offset voltage: ±4.5mV
Output current: 250mA

Datasheet

chip1stop corestaFF ONLINE Digi-Key MOUSER

Voltage Tracker S-19720 series
Low offset voltage
Ultra-compact package
Low current consumption

Automotive, 125°C Operation, 36 V Input, 50 mA Voltage Tracker with Reverse Current Protection Function S-19720 Series

Voltage Tracker that contributes to high-accuracy sensing

The industry's lowest offset voltage of ±5mV helps keep the power supply voltage of the off-board ratiometric sensor equal to the reference voltage (Vref) of the AD converter (ADC) handling ECU measurements, raising sensor reading accuracy. The voltage tracker with its 36V input and 50mA output current is housed in an HSNT-6(2025), the industry's smallest package. The S-19720 helps further reduce the footprint of automotive devices.

≫Learning more about the S-19720
≫What is a Voltage Tracker?


S-19720

Offset voltage: ±5mV
Output current: 50mA

Datasheet

chip1stop corestaFF ONLINE Digi-Key MOUSER

LDO Regulator S-19222 series
High PSRR
Fast Transient Response

Automotive, 125°C Operation, 36 V Input, 300 mA, Fast Transient Response, Voltage Regulator S-19222xxxA Series

Provides stable power supplies thanks to the industry's highest PSRR and the industry's fastest transient response!

This LDO regulator offers a 36V input, 1.8 to 30V output, 300mA output, High PSRR 75dB (at f = 1.0 kHz) with Fast Transient Response. In addition, a wide range of packages allows customers to choose the right package for their application. Stabilized power ideal for automotive devices.

≫Learning more about the S-19222


S-19222

PSRR: 75dB (at f = 1.0 kHz)

Datasheet

chip1stop corestaFF ONLINE Digi-Key MOUSER

LDO Regulator S-19213 series
High output voltage
Ultra-low current consumption

Automotive, 125°C Operation, 36 V Input, 500 mA Voltage Regulator S-19213 Series

An LDO regulator capable of outputting the high voltage required by a gate driver circuit

This is an LDO regulator with a 36V input, 1.8 to 30V output, 500mA output, an ultra-low current consumption of 5.0μA (typ.) and a high-power dissipation of 5.21W. This makes it ideal for the around 15 to 18V high-voltage gate driver circuits.

≫Learning more about the S-19213


S-19213

Output current: 500mA

Datasheet

chip1stop corestaFF ONLINE Digi-Key MOUSER