The S-82B1A Series is a protection IC for lithium-ion / lithium polymer rechargeable batteries and includes high-accuracy voltage detection circuits and delay circuits. It is suitable for protecting 1-cell lithium-ion / lithium polymer rechargeable battery packs from overcharge, overdischarge, and overcurrent.
The S-82B1A Series has an input pin for charge-discharge control signal, allowing for charge-discharge control with an external signal.
Features
- High-accuracy voltage detection circuit
- Overcharge detection voltage 3.5 V to 4.6 V (5 mV step) Accuracy ±20 mV
- Overcharge release voltage 3.1 V to 4.6 V*1 Accuracy ±50 mV
- Overdischarge detection voltage 2.0 V to 3.0 V (10 mV step) Accuracy ±50 mV
- Overdischarge release voltage 2.0 V to 3.4 V*2 Accuracy ±100 mV
- Discharge overcurrent detection voltage 1 0.010 V to 0.100 V (1 mV step) Accuracy ±3 mV
- Discharge overcurrent detection voltage 2 0.030 V to 0.200 V (1 mV step) Accuracy ±5 mV
- Load short-circuiting detection voltage 0.050 V to 0.500 V (5 mV step) Accuracy ±20 mV
- Charge overcurrent detection voltage −0.100 V to −0.010 V (1 mV step) Accuracy ±3 mV
- Detection delay times are generated only by an internal circuit (external capacitors are unnecessary).
- Charge-discharge control function
- CTL pin control logic is selectable: Active "H", active "L"
- CTL pin internal resistance connection is selectable: Pull-up, pull-down
- CTL pin internal resistance value is selectable: 1.0 MΩ, 2.0 MΩ, 3.0 MΩ, 4.0 MΩ, 5.0 MΩ
- 0 V battery charge function is selectable
- Available, unavailable
- Power-down function is selectable
- Available, unavailable
- Release condition of discharge overcurrent status is selectable
- Load disconnection, charger connection
- Release voltage of discharge overcurrent status is selectable
- Discharge overcurrent detection voltage 1 (Vdiov1),
Discharge overcurrent release voltage (Vriov) = Vdd × 0.8 (typ.) - High-withstand voltage
- VM pin and CO pin: Absolute maximum rating 28 V
- Wide operation temperature range
- Ta = −40°C to +85°C
- Low current consumption
- During operation: 2.0 μA typ., 4.0 μA max. (Ta = +25°C)
- During power-down: 50 nA max. (Ta = +25°C)
- During overdischarge: 500 nA max. (Ta = +25°C)
- Lead-free (Sn 100%), halogen-free
*1. Overcharge release voltage = Overcharge detection voltage − Overcharge hysteresis voltage
(Overcharge hysteresis voltage can be selected as 0 V or from a range of 0.1 V to 0.4 V in 50 mV step.)
*2. Overdischarge release voltage = Overdischarge detection voltage + Overdischarge hysteresis voltage
(Overdischarge hysteresis voltage can be selected as 0 V or from a range of 0.1 V to 0.7 V in 100 mV step.)
Applications
- Lithium-ion rechargeable battery pack
- Lithium polymer rechargeable battery pack