Power Management ICs

105°C Operation, 66 V Input, 200 mA Voltage Regulator S-1231 Series

This IC developed by using high-withstand voltage CMOS process technology, is a positive voltage regulator with a high-withstand voltage, low current consumption and high-accuracy output voltage.
It has a high operation voltage of 66 V, making it compatible with 12 V, 24 V, and 48 V battery systems, and it can be operated at a low consumption current of 2.0 μA typ. It also features a built-in overcurrent protection circuit to limit overcurrent of the output transistor, a built-in thermal shutdown circuit to limit heat, and a built-in open-loop protection circuit to control output voltage overvoltage.

Features

Output voltage (internally set)
1.8 V, 3.0 V, 3.3 V, 5.0 V
Output voltage (externally set)
1.8 V to 15.0 V*1, settable via external resistor
Input voltage
6.0 V to 66.0 V
Output voltage accuracy
±1.5% (Ta = +25°C)
Current consumption
During operation: 2.0 μA typ., 5.0 μA max. (Ta = +25°C)
During power-off: 0.1 μA typ., 2.0 μA max. (Ta = +25°C)
Output current
Possible to output 200 mA (at VIN ≥ VOUT(S) + 5.0 V)*2
Input capacitor
A ceramic capacitor can be used. (0.1 μF or more)
Output capacitor
A ceramic capacitor can be used. (1.0 μF or more)
Built-in overcurrent protection circuit
Limits overcurrent of output transistor.
Built-in thermal shutdown circuit
Detection temperature 170°C typ.
Built-in open-loop protection circuit (Only for type in which output voltage is externally set)
Controls VOUT overvoltage when the VADJ pin is open or shorted.
Built-in ON / OFF circuit
Ensures long battery life.
Operation temperature range
Ta = -40°C to +105°C
Lead-free (Sn 100%), halogen-free

*1. Please contact our sales representatives before using the product over 15.0 V.
*2. Please make sure that the loss of the IC will not exceed the power dissipation when the output current is large.

Applications

  • Constant-voltage power supply for industrial equipment
  • Constant-voltage power supply for home electric appliance

Parts List

  • U(Ux), S and G at the end of the product name of ABLIC Inc. were used to indicate different material specifications as “environmental code”,
    however, these have now been unified into “lead-free and halogen-free” and are identical in terms of environmental quality.
  • Note: Lead-free plating other than 100% Sn is applied to some limited old products, therefore, please contact our sales representatives for details.
  • These descriptions may be different from the actual product name and parameter.
    Please confirm the product name and specifications with the data sheet again.
  • The information herein is subject to change without notice.