Automotive ICs

Automotive, 125°C Operation, 36 V, Supply Voltage Divided Output, Voltage Detector with SENSE Pin Reverse Connection Protection S-19117/19119xxxA Series

This IC, developed using CMOS technology, is a high-accuracy voltage detector with the supply voltage divided output. The detection voltage and release voltage are fixed internally with an accuracy of ±1.5%.
Apart from the power supply pin, the detection voltage input pin (SENSE pin) is also prepared, so the output is stable even if the SENSE pin voltage (VSENSE) falls to 0 V. The SENSE pin also has a built-in reverse connection protection circuit that reduces current in the SENSE pin during a reverse connection.
The release signal can be delayed by setting a capacitor externally, and the release delay time accuracy is ±15% (CD = 3.3 nF). The output form is Nch open-drain output.
The supply voltage divided output is prepared in this IC. The supply voltage divided output is a function that divides the VSENSE into VSENSE/6, VSENSE/8, VSENSE/12 or VSENSE/14 and outputs the voltage. For example, this function makes it possible that the IC connects to a low voltage microcontroller A/D converter directly and the microcontroller monitors a battery voltage.

FIT rate calculation
ABLIC Inc. offers FIT rate calculated based on actual customer usage conditions in order to support customer functional safety design.
For more information regarding our FIT rate calculation, contact our sales representatives.

Caution: This product can be used in vehicle equipment and in-vehicle equipment. Before using the product for these purposes, it is imperative to contact our sales representatives.

Features

Detector block

Detection voltage
4.0 V to 10.0 V (0.05 V step)
Detection voltage accuracy
±1.5%
Hysteresis width selectable from "Available" / "Unavailable"
"Available": 5.0%, 10.0%
"Unavailable": 0%
Release delay time accuracy
±15% (CD = 3.3 nF)
Output form
Nch open-drain output

Supply voltage divider block

Output voltage
VPMOUT = VSENSE/6 (S-19117 Series L / M / N type)
VPMOUT = VSENSE/8 (S-19117 Series P / Q / R type)
VPMOUT = VSENSE/12 (S-19119 Series L / M / N type)
VPMOUT = VSENSE/14 (S-19119 Series P / Q / R type)
Output capacitor (CPM)
A ceramic capacitor can be used (0.1 μF to 0.22 μF).
Built-in enable circuit
Ensures long battery life.

Overall

Current consumption
During supply voltage divided output operates 1.15 μA typ.
During supply voltage divided output stops 0.75 μA typ.
Built-in reverse connection protection circuit
Reduces current in the SENSE pin during a reverse connection.
Operation voltage range
3.0 V to 36.0 V
Operation temperature range
Ta = −40°C to +125°C
Lead-free (Sn 100%), halogen-free
Withstand 45 V load dump
AEC-Q100 qualified*1

*1. Contact our sales representatives for details.

Applications

  • Automotive battery voltage detection
  • For automotive use (engine, transmission, suspension, ABS, related-devices for EV / HEV / PHEV, etc.)

Parts List

  • U(Ux), S and G at the end of the product name of ABLIC Inc. were used to indicate different material specifications as “environmental code”,
    however, these have now been unified into “lead-free and halogen-free” and are identical in terms of environmental quality.
  • Note: Lead-free plating other than 100% Sn is applied to some limited old products, therefore, please contact our sales representatives for details.
  • These descriptions may be different from the actual product name and parameter.
    Please confirm the product name and specifications with the data sheet again.
  • The information herein is subject to change without notice.