Sensors

High-accuracy Digital Temperature Sensor with Thermostat Function S-5852A Series

The S-5852A Series is a high-accuracy digital temperature sensor with thermostat function, which operates in 1.7 V to 3.6 V voltage ranges. The S-5852A Series interfaces with exteriors via I2C-bus and operates at 1.0 MHz maximum. The temperature detection signal is output by using the thermostat function which can be set by the I2C-bus. Moreover, a substantial reduction in current consumption may be achieved by using the shutdown mode which can be set by the I2C-bus.

The operation of the S-5852A Series is explained in the user's manual. Contact our sales representatives for more information.

Features

Temperature accuracy*1
±0.5°C typ./±1.0°C max. (Ta = 0°C~+65°C)
±0.5°C typ./±1.0°C max. (Ta = +75°C~+95°C)
Temperature resolution
0.5°C, 0.25°C, 0.125°C, 0.0625°C
(Selectable by the resolution register)
Temperature sample rate
7 samples / s min.
Selectable hysteresis width
No hysteresis, 1.5°C, 3.0°C, 6.0°C
Current consumption
Shutdown mode at serial bus non-active:  0.3 μA typ., 3.0 μA max. 
Active mode at serial bus non-active: 40 μA typ., 100 μA max. 
Operation voltage range
1.7 V ~ 3.6 V
Operation frequency
1.0 MHz max. (Vdd = 2.2 V ~ 3.6 V)
400 kHz max. (Vdd = 1.7 V ~ 2.2 V)
Thermostat function
Dual trip mode, single trip mode, OFF (Selectable by the configuration register)
Noise suppression
Schmitt trigger and noise filter on input pins (SCL, SDA)
Operation temperature range
Ta = −40°C ~ +125°C
Lead-free (Sn 100%), halogen-free

*1. The option can be selected.

Applications

  • Solid state drive
  • Hard disk drive
  • Notebook PC, tablet PC
  • Refrigerator
  • Air conditioning system

Parts List

  • U(Ux), S and G at the end of the product name of ABLIC Inc. were used to indicate different material specifications as “environmental code”,
    however, these have now been unified into “lead-free and halogen-free” and are identical in terms of environmental quality.
  • Note: Lead-free plating other than 100% Sn is applied to some limited old products, therefore, please contact our sales representatives for details.
  • These descriptions may be different from the actual product name and parameter.
    Please confirm the product name and specifications with the data sheet again.
  • The information herein is subject to change without notice.