Sensors

High-speed Bipolar Hall Effect Latch IC S-57M1 Series

This IC, developed by CMOS technology, is a high-accuracy Hall IC that operates with a high-sensitivity, a high-speed detection and low current consumption.
The output voltage level changes when this IC detects the intensity level of magnetic flux density and a polarity change.
Using this IC with a magnet makes it possible to detect the rotation status in various devices.
High-density mounting is possible by using the small SOT-23-3 or the super-small SNT-4A package.
Due to its high-accuracy magnetic characteristics, this IC can make operation's dispersion in the system combined with magnet smaller.

Magnetic simulation service
ABLIC Inc. offers a “magnetic simulation service” that provides the ideal combination of magnets and our magnetic sensor ICs for customer systems. Our magnetic simulation service will reduce prototype production, development period and development costs. In addition, it will contribute to optimization of parts to realize high cost performance.
For more information regarding our magnetic simulation service, refer to “Introduction of Magnetic Simulation Service.” For usage inquiries, contact our sales representatives.

Features

Pole detection
Bipolar latch
Output logic*1
VOUT = "L" at S pole detection
VOUT = "H" at S pole detection
Output form*1
Nch open drain output, CMOS output
Magnetic sensitivity
Bop = 3.0 mT typ.
Operating cycle (current consumption)
50 μs (1400 μA) typ.
Power supply voltage range
2.7 V ~ 5.5 V
Operation temperature range
Ta= -40°C to +125°C
Lead-free (Sn 100% ), halogen-free


*1. The Option can be selected.

Applications

  • Motor
  • Housing equipment
  • Industrial equipment

Parts List

  • U(Ux), S and G at the end of the product name of ABLIC Inc. were used to indicate different material specifications as “environmental code”,
    however, these have now been unified into “lead-free and halogen-free” and are identical in terms of environmental quality.
  • Note: Lead-free plating other than 100% Sn is applied to some limited old products, therefore, please contact our sales representatives for details.
  • These descriptions may be different from the actual product name and parameter.
    Please confirm the product name and specifications with the data sheet again.
  • The information herein is subject to change without notice.