Power Management ICs

Battery Protection IC with Charge-Discharge Control Function for 1-Cell Pack S-82N1A Series

Features of S-82M1A/N1A/N1B Series. Contributes to longer battery life and higher safety.The S-82N1A Series is a protection IC for lithium-ion / lithium polymer rechargeable batteries, which includes high-accuracy voltage detection circuits and delay circuits. It is suitable for protecting 1-cell lithium-ion / lithium polymer rechargeable battery packs from overcharge, overdischarge, and overcurrent.
The S-82N1A Series has an input pin for charge-discharge control signal, allowing for charge-discharge control with an external signal.


High-accuracy voltage detection circuit
Overcharge detection voltage: 3.500 V to 4.600 V (5 mV step) Accuracy ±15 mV
Overcharge release voltage: 3.100 V to 4.600 V*1 Accuracy ±50 mV
Overdischarge detection voltage: 2.000 V to 3.000 V (10 mV step) Accuracy ±50 mV
Overdischarge release voltage: 2.000 V to 3.400 V*2 Accuracy ±100 mV
Discharge overcurrent detection voltage: 0.003 V to 0.100 V (1 mV step) Accuracy ±3 mV
Load short-circuiting detection voltage: 0.010 V to 0.200 V (1 mV step) Accuracy ±7 mV
Charge overcurrent detection voltage: −0.100 V to −0.003 V (1 mV step) Accuracy ±3 mV
Detection delay times are generated only by an internal circuit (external capacitors are unnecessary).
Charge-discharge control function
CTL pin control logic: Active "H", active "L"
CTL pin internal resistance connection: Pull-up, pull-down
CTL pin internal resistance value: 1.0 MΩ, 2.0 MΩ, 3.0 MΩ, 4.0 MΩ, 5.0 MΩ
Discharge overcurrent control function
Release condition of discharge overcurrent status: Load disconnection, charger connection
Release voltage of discharge overcurrent status: Discharge overcurrent detection voltage (VDIOV), Discharge overcurrent release voltage (VRIOV) = VDD × 0.8 (typ.)
0 V battery charge
Enabled, inhibited
Power-down function
Available, unavailable
High-withstand voltage
VM pin, CO pin: Absolute maximum rating 28 V
Wide operation temperature range
Ta = −40°C to +85°C
Low current consumption
During operation: 600 nA typ., 990 nA max. (Ta = +25°C)
During power-down: 50 nA max. (Ta = +25°C)
During overdischarge: 500 nA max. (Ta = +25°C)
Lead-free (Sn 100%), halogen-free

*1. Overcharge release voltage = Overcharge detection voltage − Overcharge hysteresis voltage
(Overcharge hysteresis voltage can be selected as 0 V or from a range of 0.1 V to 0.4 V in 50 mV step.)
*2. Overdischarge release voltage = Overdischarge detection voltage + Overdischarge hysteresis voltage
(Overdischarge hysteresis voltage can be selected as 0 V or from a range of 0.1 V to 0.7 V in 100 mV step.)


  • Lithium-ion rechargeable battery pack
  • Lithium polymer rechargeable battery pack

Parts List

  • U(Ux), S and G at the end of the product name of ABLIC Inc. were used to indicate different material specifications as “environmental code”,
    however, these have now been unified into “lead-free and halogen-free” and are identical in terms of environmental quality.
  • Note: Lead-free plating other than 100% Sn is applied to some limited old products, therefore, please contact our sales representatives for details.
  • These descriptions may be different from the actual product name and parameter.
    Please confirm the product name and specifications with the data sheet again.
  • The information herein is subject to change without notice.