Automotive ICs

Automotive, 105°C Operation, 10V, SENSE-Input Voltage Detector S-19103/19109 Series

The S-19103/19109 Series is a high-accuracy voltage detector developed using CMOS technology. The detection voltage is fixed internally with an accuracy of ±3.5% (−VVdet(s) ≥ 2.2 V). The release voltage is set to the same value as the detection voltage, since there is no hysteresis width. It operates with current consumption of 500 nA typ.
Apart from the power supply pin, the detection voltage input pin (SENSE pin) is also prepared, so the output is stable even if the SENSE pin falls to 0 V.
Two output forms Nch open-drain output and CMOS output are available.

FIT rate calculation
ABLIC Inc. offers FIT rate calculated based on actual customer usage conditions in order to support customer functional safety design.
For more information regarding our FIT rate calculation, contact our sales representatives.

Caution: This product can be used in vehicle equipment and in-vehicle equipment. Before using the product for these purposes, it is imperative to contact our sales representatives.

Features

Detection voltage
1.0 V to 5.0 V (0.1 V step)
Detection voltage accuracy
±3.5%
(2.2 V ≤ -Vdet(s) ≤ 5.0 V, Ta = -40°C to +105°C)
±(2.5% + 22 mV)
(1.0 V ≤ -Vdet(s) < 2.2 V, Ta = -40°C to +105°C)
Current consumption
500 nA typ.
Operation voltage range
0.95 V to 10.0 V
Output form
Nch open-drain output (Active "L")
CMOS output (Active "L")
Operation temperature range
Ta = -40°C to +105°C
Lead-free (Sn 100%), halogen-free
AEC-Q100 qualified*1

*1. Contact our sales representatives for details.

Applications

  • For automotive use (accessory, car navigation system, car audio system, etc.)

Parts List

  • U(Ux), S and G at the end of the product name of ABLIC Inc. were used to indicate different material specifications as “environmental code”,
    however, these have now been unified into “lead-free and halogen-free” and are identical in terms of environmental quality.
  • Note: Lead-free plating other than 100% Sn is applied to some limited old products, therefore, please contact our sales representatives for details.
  • These descriptions may be different from the actual product name and parameter.
    Please confirm the product name and specifications with the data sheet again.
  • The information herein is subject to change without notice.