Ultra-Low Current, Low Voltage,
Omnipolar Hall Effect Switch IC

S-5719 Series

Ultra-Low Current, Low Voltage, Omnipolar Hall Effect Switch IC - S-5719

Hall Effect Switch IC Optimized for
Applications Powered by Silver Oxide Batteries

  • Designed for silver oxide battery-powered applications
    Low voltage operation from 1.3V
  • Provides about 5 times the operating time of the current version
    Low current consumption for extended battery life
  • Contributes to product miniaturization and improved design
    Small and thin package

Ultra-Low Current, Low Voltage,
Omnipolar Hall Effect Switch IC

S-5719 Series

Buy Online

chip1stop corestaff digikey mouser

Designed for Silver Oxide Battery-Powered Applications
Ultra-Low Current, Low Voltage, Omnipolar Hall Effect Switch IC

Low voltage operation from 1.3V

Low voltage operation from 1.3V

The S-5719 Series features a wide power supply voltage range from 1.3V to 3.6V. This makes it well-suited for electronic devices powered by typical lithium-ion batteries (approx. 3.0V), as well as those operating at lower voltages, such as silver oxide batteries (approx. 1.55V).
This flexibility to accommodate various battery types increases design freedom and enables integration across a broad range of applications.

Low current consumption for extended battery life

Low current consumption for extended battery life

The S-5719 Series Hall Effect Switch IC achieves an industry’s top class* ultra-low current consumption of only 0.2μA (typ.) .
This translates to about five times longer operating time compared to our current S-5712 Series products, significantly extending battery life of battery-powered applications.
It’s ideal for operations such as wake-up and on/off control, as it detects the attachment status of devices using a magnetic sensor.

*As a Hall effect switch IC. Based on our research as of July 2025.

Small and thin package

Small and thin package

The S-5719 Series is housed in a compact 1.6 × 1.2 × t0.5 (max.) mm SNT-4A package.
This allows the use of smaller magnets and greater flexibility in their placement, ultimately contributing to the miniaturization and enhanced design of the final product.
The S-5719 Series is highly durable because its Hall element and signal processing circuit are formed on the same silicon chip and molded in resin. This makes it an ideal replacement for reed switches, which often face challenges with vibration and shock resistance.

Development support through magnetic simulation

Development support through magnetic simulation

ABLIC offers a “magnetic simulation service” to help customers find the ideal combination between magnets and our magnetic sensor ICs for their systems. Our magnetic simulation service will reduce prototype production, development time, and development costs. Additionally, it will contribute to the optimization of parts to realize high-cost performance.

Please check “magnetic simulation service” for details.

Applications

  • CGM (Continuous Glucose Monitoring), Wearable device
  • Home security device(Window open/close sensor, Smart lock, or Smoke detector)
  • Utility meter (Gas meter, Water meter or Smart meter)

Magnetic Sensor (Hall Effect Switch & Latch ICs) Lineup

Specifications

Product name

S-5719 Series

  For General-use
Power supply voltage range 1.3V to 3.6V
Pole detection Detection of omnipolar
Magnetic sensitivity 1.8mT, 3.0mT, 4.5mT
Operating cycle (current consumption)*1 tCYCLE = 531.2ms typ. (IDD = 0.2µA typ.)
tCYCLE = 133.2ms typ. (IDD = 0.5µA typ.)
Package SNT-4A
Operation temperature range Ta = -40°C to +85°C
Datasheet

Datasheet

*1. The option can be selected.

Buy Online

S-5719 Series

chip1stop corestaFF ONLINE Digi-Key MOUSER