S-57TZ S Datasheet, Specifications, Parts list and Support

Product Overview

TSOT-23-3S (MP003-E)

HSNT-6(2025) (PJ006-B)

English for China, Hong Kong, Taiwan

This IC, developed by CMOS technology, is a high-accuracy Hall effect IC that operates with high temperature and high-withstand voltage.
The IC switches output voltage level when the IC detects magnetic flux density (magnetic field) polarity changes. The ZCL (Zero Crossing Latch) detection method realizes polarity changes detection with the higher accuracy than the conventional bipolar latch method. Using this IC with a magnet makes it possible to detect the rotation status in various devices.

Magnetic simulation service
ABLIC Inc. offers a “magnetic simulation service” that provides the ideal combination of magnets and our magnetic sensor ICs for customer systems. Our magnetic simulation service will reduce prototype production, development period and development costs. In addition, it will contribute to optimization of parts to realize high cost performance.
For more information regarding our magnetic simulation service, refer to “Introduction of Magnetic Simulation Service.” For usage inquiries, contact our sales representatives.

Features

Uses a thin (t0.80 mm max.) TSOT-23-3S or ultra-thin (t0.50 mm max.) HSNT-6(2025) package, allowing for device miniaturization
Contributes to reduction of mechanism operation dispersion through high accuracy detection of magnetic flux density (magnetic field) polarity changes
Suitable for devices which require high quality due to the production system of this IC which certifies automotive application quality
Contributes to device safe design with a built-in reverse voltage protection circuit and output current limit circuit

Specifications

Pole detection: ZCL detection
Output logic^{^*1}: V_OUT = "L" at S pole detection
V_OUT = "H" at S pole detection
Output form^*1: Nch open-drain output
Nch driver + built-in pull-up resistor (1.2 kΩ typ.)
Zero crossing latch point: B_Z = 0.0 mT typ.
Release point (S pole)^*1: B_RS = 3.0 mT typ.
B_RS = 6.0 mT typ.
Chopping frequency: f_C = 500 kHz typ.
Output delay time: t_D = 8.0 μs typ.
Power supply voltage range^*2: V_DD = 2.7 V to 26.0 V
Built-in regulator
Built-in reverse voltage protection circuit
Built-in output current limit circuit
Operation temperature range: Ta = −40°C to +150°C
Lead-free (Sn 100%), halogen-free
AEC-Q100 qualified^*3

*1. The option can be selected.
*2. V_DD = 2.7 V to 5.5 V when output form is Nch driver + built-in pull-up resistor (1.2 kΩ typ.)
*3. Contact our sales representatives for details.

Applications

Brushless DC (BLDC) motor for automotive applications
Automobile equipment
Housing equipment
Industrial equipment

Parts List

U(Ux), S and G at the end of the product name of ABLIC Inc. were used to indicate different material specifications as “environmental code”,
however, these have now been unified into “lead-free and halogen-free” and are identical in terms of environmental quality.
Note: Lead-free plating other than 100% Sn is applied to some limited old products, therefore, please contact our sales representatives for details.
These descriptions may be different from the actual product name and parameter.
Please confirm the product name and specifications with the data sheet again.
The information herein is subject to change without notice.

Automotive, 150°C Operation, High-Withstand Voltage, High-Speed, ZCL™ Hall Effect IC S-57TZ S Series

Related articles